Welding training

Elektrolas provides recognized welding courses and welding training for various welding processes. These skills courses fall under the responsibility of the Dutch Institute for Welding Technology (NIL). For each welding process, diplomas can be obtained at various levels. The manual skills training normally takes place in our own welding school, where all the necessary equipment is available. Welding training on location is also possible.

A welding course at Elektrolas: the benefits

  • NIL certified welding trainer
  • Small groups (Maximum of 9 people)
  • A lot of personal attention
  • Adjust level if needed
  • Use of modern equipment
  • Company visit to a research lab
  • Subsidy possibilties

 

We train your welders. Would you like more information about our manual skills training programs? Let us contact you!

Welding course MIG/MAG welding

In this welding course, you will learn the professional skills of MIG/MAG welding. After the welding course, you should be able to perform the described and established skills independently using the usual drawings and work instructions.

Elektrolas provides MIG/MAG welding courses in the following levels:

  • Level 1: Open to everyone
  • Level 2: MIG/MAG welding level 1 is recommended but not mandatory
  • Level 3: MIG/MAG welding level 2 is recommended but not mandatory
  • Level 4: MIG/MAG welding level 3 certificate is mandatory

TIG welding training

In this welding course, you will learn the professional trades of TIG welding. The quality of TIG welding is mainly determined by the skills of the welder. After the training you should be able to perform the described and established skills independently, using the usual drawings and work instructions.

Elektrolas provides TIG welding training in the following levels:

  • Level 1: Open to everyone
  • Level 2: TIG welding level 1 is recommended but not mandatory
  • Level 3: TIG welding level 2 is recommended but not mandatory
  • Level 4: TIG welding level 3 certificate is mandatory

Welding course SMAW welding

In this welding course, you will learn the professional craftsmanship of arc welding with covered electrode. After the training you should be able to carry out the described and established skills independently on the basis of the usual drawings and work instructions.


Elektrolas provides SMAW welding training in the following levels:

  • Level 1: Open to everyone
  • Level 2: SMAW welding level 1 is recommended but not mandatory
  • Level 3: SMAW welding level 2 is recommended but not mandatory
  • Level 4: SMAW welding level 3 certificate is mandatory

Welding course Hygienic welding

Food safety and hygiene requirements are very high within food and pharma, as even one wrong weld can be a source of contamination for the agent to be produced. Because welder certifications did not match the specific requirements in hygienic situations, HDN, in collaboration with NIL, developed a unified procedure that allows the welder to exclude (unnecessary) contamination.

To obtain the Hygienic Welder certificate, the welder should have a solid level of experience. There are two training options. 

More informatie about Hygienic welding course.

Exams

The welding courses are concluded with a theory and practical exam. These exams are conducted by an independent examiner from the Dutch Institute for Welding Technology (NIL). If you pass, you will receive an NIL diploma. This diploma will always be valid.

 

Certified NIL Trainer

Elektrolas is registered by the Dutch Institute for Welding Technology (NIL) as an Approved Trainer. This recognition means that with our skills and management training we meet the conditions laid down in the NIL regulations. These include quality control, training plan, materials and experience of our teachers.

 

Subsidy possibilities

There are several possibilities to qualify for an attractive subsidy. You will have to apply for this yourself, but of course we are happy to help you on your way by informing you about the various possibilities.

OOM Foundation
OOM is a training consultancy in the metalworking industry. Their goal is to raise the level of craftsmanship in the metal industry. They do this by stimulating the learning culture within companies. OOM co-finances the training costs for employer, employee or student.  Read more about the OOM foundation.

STAP Budget
STAP budget is a personal development budget which you can use to train yourself or to be retrained. It is used to cover (part of) the costs of a training activity. Per year you can do a maximum of 1 STAP course, for which a maximum of 1000 euros STAP budget can be allocated. All our courses, workshops and trainings are eligible for this reimbursement. Read more about the STAP budget.

More information

We use the most modern equipment in our classrooms. This means that theory lessons can also be followed digitally. Are you interested in a welding course? Are you interested in a welding course? Call our Education department on +31 (0)416-235036 or let us call you.

Our overall approach

When it comes to welding, Elektrolas has all the knowledge and resources in-house. We are a point of contact for all those involved in the welding process, from tendering to quality control. We are a total provider in the welding field. We secure quality, offer training, sell, rent and service on welding equipment. This is our disc-of-five. Five services that reinforce each other. That is how we ensure that our customers are ready for the future.
 
disc-of-five-elektrolas